View STBHL02-15_8395756.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev. a information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of analog devices. a 5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781/329-4700 world wide web site: http://www.analog.com fax: 781/326-8703 ? analog devices, inc., 1998 analog signal conditioning panels general description the analog devices family of multiplexed analog signal condi- tioning panels offers a variety of ways to connect real-world signals to data acquisition boards. the panels described in this data sheet can all be used with the rti-820, and any other product that supports the analog devices multiplexed analog bus standard. these panels may be mixed and matched in an application since they are addressed in the same fashion by the rti-820. consult the appropriate rti-820 data sheet to deter- mine the maximum number of analog signal conditioning panels supported. for all panels, field signals are brought in via screw terminal connectors. a screw terminal is also provided for the connection of the +5 v power supply. other voltages required for the ana- log circuitry are produced on-board. the rti products provide +5 v power capability for some extra panels. the pwr-01 power supply is recommended for the panels and provide ample +5 v power for most applications. consult the rti-820 data sheet for more information about powering the panels. interchangeability of the different panels is accomplished by use of a standard multiplexed analog bus developed by analog devices. this bus allows the high channel capacity possible for the rti-820. the multiplexed analog signals are brought to the rti-820 via the cab-01 or cab-01-2 cables. 5b series signal conditioning modules are sealed for protection from harsh environments. the optional cv-01 cover may be used to protect each of the five stb panels. the 5b02, stb-tci and stb-hli provide signal conditioning for those applications requiring high electrical isolation. the stb-tc, stb-aot, and stb-hl02 panels provide nonisolated signal conditioning. this data sheet gives the description and specifications for each of these panels. in addition there is a panel selection guide for quick reference, an i/o comparison chart as a configuration aid and a mounting diagram at the end of the data sheet. features a variety of solutions for analog signal interfacing isolated and nonisolated signal conditioning interfacing capabilities to a wide variety of real-world sensors including: thermocouples rtds strain gages other low level voltage inputs current inputs high level voltage inputs current outputs high level voltage outputs panels are interchangeable using same cables and addressing scheme i/o modules or screw terminals removable for easy field installation and replacement modular analog expansion for rti ? -820 19" rack mountable rti is a registered trademark of analog devices, inc.
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C2C rev. a 5b02 the 5b02 panel provides 16 sockets for 5b series signal condi- tioning modules. the 5b series provides isolated signal condi- tioning for thermocouples, rtds, low and high level voltage inputs, current inputs and outputs, and strain gage inputs. a nonisolated voltage switch input is also available. a list of the different 5b series modules that the rti-820 supports is shown to the right. see the 5b series modules data sheet for more detailed specifications. with the 5b02 and the 5b series mod- ules, any combination of the various inputs and outputs can be used on one panel, providing the most flexible analog i/o solution. the 5b02 panel consists of sockets and screw terminals for sixteen 5b series modules. cold junction compensation for each module socket is provided for thermocouple modules. the panel contains the necessary decoding circuitry to address each position as an input or an output. a rack mount (ac1363) may be ordered separately. a diagram of the rack mount is shown at the end of the data sheet, and a functional diagram of the panel is shown in figure 1. when high performance, isolation and modularity of i/o are required, the 5b series modules and the 5b02 are the best solu- tion for data acquisition applications. 5b series signal conditioning modules model description 5b30 isolated millivolt input 5b31 isolated volt input 5b32 isolated current input 5b34 isolated rtd input 5b35 isolated 4-wire rtd input 5b36 isolated potentiometer input 5b37 isolated thermocouple input 5b47 isolated linearized thermocouple input 5b38 isolated strain gage input 5b39 isolated current output 5b40 isolated wideband millivolt input 5b41 isolated wideband volt input 5b42 isolated loop-powered transmitter input ac1367 nonisolated voltage switch input 5b02Cspecifications for detailed specifications of the modules, see the 5b series data sheet. number of channels 16 (using input or output plug-in modules) channel-to-channel isolation 1500 v rms (modules) input voltage protection 240 v rms (modules) physical dimensions 3.5" 17.4" 3.2" operating temperature range C40 c to +85 c from channel select logic 4 4 address decoders 16 output enable 16 input enable output bus input bus from dac to a/d channel 0 +5v power channel 1 channel 14 channel 15 figure 1. 5b02 block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C3C rev. a stb-tci the stb-tci isolated thermocouple panel provides the means to interface up to eight low level voltage signals requiring high electrical isolation. low level signals, including thermocouple voltages, can be read with high accuracy even in noisy environ- ments. standard thermocouple types such as j, k, t, e, r, b and s can be used with the panel, and cold junction compensation is provided. each input channel is provided with user selectable gains of 50, 100, 200 and 1000, permitting signal ranges of 5 mv, 25 mv, 50 mv and 100 mv. each channel has a quick-disconnect screw terminal connector making field installa- tion and replacement easy. a cover (cv-01) and a rack mount (rm-02) may be ordered separately. each input signal on the stb-tci panel passes through a 3-pole low-pass filter with a cutoff frequency of 4 hz. this filter re- duces noise that may be present at the analog inputs. break detect circuitry is also present to determine if a thermocouple or cable has been disconnected. each channel has an isolation amplifier that provides 750 v rms of channel-to-system and channel-to-channel isolation. overvoltage input protection of 240 v is provided as well. a functional diagram of the stb-tci is shown in figure 2. the stb-tci, or the 5b02 with 5b30, 5b37, 5b40, or 5b47 modules, should be used instead of the stb-tc panel when high isolation is required for a harsh environment. the stb-tci panel may be used instead of 5b series modules when an application has many low level inputs and single channel modularity is not required. stb-tciCspecifications (typical @ +25 8 c and +5 v dc) number of input channels 8 isolation 750 v rms channel-to-channel and channel-to-system input impedance 50 m w input voltage range 5 mv, 25 mv, 50 mv, 100 mv input overvoltage protection 240 v ac rms gain range 50, 100, 200, 1000 jumper configurable per channel gain accuracy 1 0.05% (at factory adjusted gain of 100) output offset 1 3 mv offset drift vs. temperature 3.25 m v/ c (at gain of 100) (referred to input) cjc accuracy 1 c low-pass filter frequency 4 hz common-mode rejection 130 db power requirements +5 v 5% @ 300 ma physical dimensions without optional cover 8.25" 6.8" 1.97" (20.95 cm 17.27 cm 5.0 cm) with optional cover 8.25" 6.8" 2.14" (20.95 cm 17.27 cm 5.43 cm) operating temperature range 0 c to +60 c notes 1 adjustable to zero. specifications subject to change without notice. 9 to 1 analog signal to rti-820 board and channel address decoding from rti-820 cold junction compensation sensor user-selectable gain of 50, 100, 200 or 1000 user selectable gain etc. channel 0 channel 1 channel 7 figure 2. stb-tci block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C4C rev. a stb-hli the stb-hli isolated high level panel provides eight inputs for interfacing high level voltage signals that require high electrical isolation. this panel is for use in harsh environments where large common-mode voltages are present. each input channel is provided with user selectable gains of 0.5 and 1 permitting signal ranges of 5 v or 10 v. each channel has a quick- disconnect screw terminal connector making field installation and replacement easy. an optional cover (cv-01) and a rack mount kit (rm-02) are also available. each input signal on the stb-hli panel passes through a single pole low-pass filter with a cutoff frequency of 500 hz. this filter reduces high frequency noise that may be present at the analog inputs. a pr ecision input amplifier conditions each analog signal. each channel has an isolation amplifier that provides 750 v rms of channel-to-system and channel-to-channel isolation. over- voltage input protection of 240 v is provided as well. a func- tional diagram of the stb-hli is shown in figure 3. the stb-hli, or the 5b02 with 5b31 or 5b41, modules should be used instead of the stb-hl02 panel when isolation is re- quired. the stb-hli may be used instead of 5b series mod- ules when an application has many high level inputs and single channel modularity is not required. stb-hliCspecifications (typical @ +25 8 c and +5 v dc) number of input channels 8 isolation 750 v rms channel-to-channel and channel-to-system input voltage range 5 v, 10 v input accuracy 1 0.05% of span (factory adjusted gain of 1) input protection 240 v ac rms gain range 1, 0.5 jumper configurable per channel output offset 1 3 mv offset drift vs. temperature 100 m v/ c (referred to output) input impedance 500 k w low-pass filter frequency 500 hz common-mode rejection 86 db power requirements +5 v 5% @ 300 ma physical dimensions without optional cover 8.25" 6.8" 1.97" (20.95 cm 17.27 cm 5.0 cm) with optional cover 8.25" 6.8" 2.14" (20.95 cm 17.27 cm 5.43 cm) operating temperature range 0 c to +60 c notes 1 adjustable to zero. specifications subject to change without notice. 8 to 1 analog signal to rti-820 board and channel address decoding from rti-820 user-selectable gain of 1 and 0.5 user-selectable gain etc. channel 0 channel 1 channel 7 figure 3. stb-hli block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C5C rev. a stb-tc the stb-tc thermocouple panel provides sixteen low level voltage inputs or fifteen thermocouple inputs with cold junction compensation. the range of the inputs can be set to be all +5 v, 100 mv, 50 mv, 25 mv, 10 mv or 5 mv range. a dip switch is used to select a gain of 1, 50, 100, 200, 500 or 1000 to provide these ranges. at each channel, users can also add an 8 hz low-pass filter to block out high frequency noise, a return path for bias currents and break detect circuitry. all these op- tions are enabled through split-pad connections. the analog signals are connected to the panel via removable screw terminals for easy installation and field replacement. an optional cover (cv-01) and a rack mount kit (rm-02) are also available. a functional diagram of the stb-tc is shown in figure 4. the stb-tc is the right solution for applications with low level signals or thermocouples which require no electrical isolation. the stb-tci, or 5b02 with 5b series signal conditioning modules, should be used if electrical isolation is required or if a mix of thermocouple types is to be used. stb-tcCspecifications (typical @ +25 8 c and +5 v dc) number of inputs 16 differential (accepts 15 thermocouples plus 1 input of cjc) input voltage range 5 v, 100 mv, 50 mv, 25 mv, 10 mv, 5mv input overvoltage protection 30 v input resistance 1 1 g w gain range 1, 50, 100, 200, 500, 1000 user defined gain accuracy 2 0.05% input offset 2 15 m v output offset 2 2.5 mv cjc accuracy 1 c low-pass filter frequency 3 8 hz common-mode rejection 4 100 db power requirements +5 v @ 200 ma physical dimensions without optional cover 8.25" 6.8" 1.97" (20.95 cm 17.27 cm 5.0 cm) with optional cover 8.25" 6.8" 2.14" (20.95 cm 17.27 cm 5.43 cm) operating temperature range 0 c to +60 c notes 1 with break detect and bias return split pads open. 2 adjustable to zero. 3 removable. 4 cmrr according to factory configuration of gain of 100 (at gain of 1, 80 db; at gain 200 or greater, 110 db). specifications subject to change without notice. cold junction compensation sensor 16 to 1 gain select (1, 50, 100, 200, 500 or 1000) board and channel address decoding from rti-820 user- selectable break detect channel 0 user- selectable 8 hz low-pass filter user- selectable bias return channel 1 user- selectable options analog signal rti-820 channel 15 jumper selects channel 15 or cjc user- selectable options figure 4. stb-tc block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C6C rev. a stb-hl02 the stb-hl02 high level voltage panel provides sixteen high level voltage inputs and four voltage outputs. the input levels can be selected to be all 5 v or 10 v range. an offset of 5v developed from output channel 0 can also be applied to the 5 v input signal allowing a wider range of input signals to be accommodated. at each input circuit, positions are provided for users to add their own resistors or capacitors for filtering or signal attenuation. the voltage output channels are 5 v or 0 vC5 v, with a maximum current of 5 ma per channel. output values are held by use of a sample-and hold amplifier at each channel. the output range selection is made at the rti-820 and is applicable to all channels. all signals are connected to the panel via removable screw terminals for easy installation and field replacement. an optional cover (cv-01) and rack mount kit (rm-02) are also available. a functional diagram of the stb-hl02 is shown in figure 5. the stb-hl02 is the right solution for signals that require no electrical isolation such as transmitters and other precondi- tioned high level signals. the stb-hli or 5b02 with 5b series signal conditioning modules should be used if electrical isolation is required for high level signals. stb-hl02Cspecifications (typical @ +25 8 c and +5 v dc) number of input channels 16 single-ended input voltage range 1 5 v, 10 v input accuracy 0.05% of span input protection 2 35 v (powered), 20 v (unpowered) input resistance 1 g w number of output channels 4 output voltage range 5 v, 0 vC5 v @ 5 ma output accuracy 0.05% of span output noise 1 mv rms, 10 khz bandwidth power requirements +5 v @ 350 ma physical dimensions without optional cover 8.25" 6.8" 1.97" (20.95 cm 17.27 cm 5.0 cm) with optional cover 8.25" 6.8" 2.14" (20.95 cm 17.27 cm 5.43 cm) operating temperature range 0 c to +60 c notes 1 the stb-hl02 has the capability to apply an offset from output channel 0 to a 5 v signal to accommodate different input ranges (such as 0 v to 10 v). 2 the stb-hl02 panel provides three sockets per input channel for user in- stalled resistor attenuators or low-pass filter circuits. specifications subject to change without notice. 16 to 1 gain select (1 or 0.5) board and channel address decoding analog signal from rti-820 channel 0 user- selectable options* analog signal rti-820 channel 1 user- selectable options channel 15 channel 0 channel 3 channel 0 output jumper selectable as offset for inputs 1 to 4 user installed resistors or capacitors for filtering, signal attenuation or current sensing. * user- selectable options figure 5. stb-hl02 block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C7C rev. a stb-aot the stb-aot analog output panel provides eight channels of nonisolated analog output. the stb-aot supports four volt- age and two current output ranges which are jumper-selectable on a per channel basis. the six ranges are 5 v, 0 vC5 v, 10 v, 0 vC10 v, 0 maC20 ma and 4 maC20 ma. each output chan- nel has a sample-and-hold amplifier which holds the output values sent by the digital-to-analog converter constant. the output accuracy for both voltage and current output is 0.05% of span. the loop power for current outputs can be provided by an on-board dc-to-dc or supplied by an external dc voltage source (v loop ) of between 18 v and 32 v. the compliance voltage is 10.5 v when using the internal power source and v loop C 5 v when using an external power source. each channel has a quick-disconnect screw terminal connector making field installation and replacement easy. an optional cover (cv-01) and a rack mount kit (rm-02) are also available. a functional diagram of the stb-aot is shown in figure 6. the stb-aot is the best solution for applications that do not require analog output isolation. the output channels can be used to control material transfer rates, fluid flow, motor speed, or to provide setpoints to loop controllers. if isolation is re- quired, the 5b02 with 5b39 signal conditioning modules should be used. stb-aotCspecifications (typical @ +25 8 c and +5 v dc) number of input channels 8 voltage output ranges 1 5 v, 0 vC5 v, 10 v, 0 vC10 v current output ranges 1 0 maC20 ma 2 , 4 maC20 ma output accuracy 0.05% of span output drive current (v out options) 5 ma output noise 1.0 mv rms, 10 khz bandwidth compliance voltage 10.5 v (internal loop power) v loop C 5 v (external loop power) slew rate voltage 0.01 v/ m s current 10 m a/ m s droop rate voltage 30 mv/sec current 60 m a/sec power requirements +5 v @ 1.2 a (internal loop power) +5 v @ 0.4 a (external loop power) physical dimensions without optional cover 8.25" 6.8" 1.97" (20.95 cm 17.27 cm 5.0 cm) with optional cover 8.25" 6.8" 2.14" (20.95 cm 17.27 cm 5.43 cm) operating temperature range 0 c to +70 c notes 1 output ranges are jumper selectable. 2 the default output range is 0 maC20 ma. specifications subject to change without notice. gnd stb a b c v out r1 v out 6 5v 0vC5v 6 10v 0vC10v ch0 out ch0 gnd 18vC32v external loop power ab c range jumpers i out 0maC20ma 4maC20ma v/i internal power +15v +10v ref r2 r1 sha 0maC20ma 4maC20ma v out /i out # 0 board and channel address decoding v out /i out # 7 ch7 gnd ch7 out +15v C15v dcCdc +15v C15v gnd external +5v dgnd +5v signal gnd channel address from rti-820 analog signal from rti-820 +15v C15v +5v figure 6. stb-aot block diagram obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C8C rev. a analog signal conditioning panel selection guide channel input output power rack model # capacity types types isolation required mount kit cover 5b02 16 i/o thermocouples current 1500 v rms dependent ac1363 none rtds on modules strain gage current low level voltage high level voltage stb-tci 8 ain thermocouples none 750 v rms +5 v rm-02 cv-01 low level @ 300 ma voltage stb-hli 8 ain high level none 750 v rms +5 v rm-02 cv-01 voltage in @ 300 ma stb-tc 16 ain (di) thermocouples none no +5 v rm-02 cv-01 low level @ 200 ma voltage stb-hl02 16 ain (se) high level high level no +5 v rm-02 cv-01 4 aot voltage voltage @ 350 ma stb-aot 8 aot none current no +5 v rm-02 cv-01 high level voltage @ 1.2 a i/o configuration chart model # i/o types range i/o resolution* 5b02 5b modules: inputs: thermocouples 5b37-j-01 j C100 c to +760 c 0.21 c 5b37-k-02 k C100 c to +1350 c 0.35 c 5b37-t-03 t C100 c to +400 c 0.12 c 5b37-e-04 e 0 c to +900 c 0.22 c 5b37-r-05 r 0 c to +1750 c 0.43 c 5b37-s-05 s 0 c to +1750 c 0.43 c 5b37-b-06 b 0 c to +1800 c 0.44 c rtds 5b34-01 100 pt C100 c to +100 c 0.05 c 5b34-02 0 c to +100 c 0.02 c 5b34-03 0 c to +200 c 0.05 c 5b34-04 0 c to +600 c 0.15 c 5b34-c-01 10 cu 0 c to +120 c (10 w @ 0 c) 0.03 c 5b34-c-02 0 c to +120 c (10 w @ +25 c) 0.03 c 5b34-n-01 120 ni 0 c to +300 c 0.07 c current in 5b32-01 4 maC20 ma 3.91 m a 5b32-02 0 maC20 ma 4.88 m a low level voltage 5b30-01 (0 hzC4 hz) 0.01 v 4.88 m v 5b30-02 0.05 v 24.4 m v 5b30-03 0.10 v 48.8 m v 5b30-04 0.01 v 4.88 m v 5b30-05 0.05 v 24.4 m v 5b30-06 0.10 v 48.8 m v 5b40-01 (0 hzC10 khz) 0.01 v 4.88 m v 5b40-02 0.05 v 24.4 m v 5b40-03 0.10 v 48.8 m v 5b40-04 0.01 v 4.88 m v 5b40-05 0.05 v 24.4 m v 5b40-06 0.10 v 48.8 m v obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C9C rev. a i/o configuration chart (continued) model # i/o types range i/o resolution* high level voltage 5b31-01 (0 hzC4 hz) 1 v 0.49 mv 5b31-02 5 v 2.44 mv 5b31-03 10 v 4.88 mv 5b31-04 1 v 0.49 mv 5b31-05 5 v 2.44 mv 5b31-06 10 v 4.88 mv 5b41-01 (0 hzC10 khz) 1 v 0.49 mv 5b41-02 5 v 2.44 mv 5b41-03 10 v 4.88 mv 5b41-04 1 v 0.49 mv 5b41-05 5 v 2.44 mv 5b41-06 10 v 4.88 mv strain gage 5b38-02 10.0 v excitation 30 mv 7.32 m v 5b38-04 10.0 v excitation 30 mv 7.32 m v 5b38-05 10.0 v excitation 20 mv 9.76 m v outputs: 5b39-01 current 4 maC20 ma 3.91 m a 5b39-02 4 maC20 ma 3.91 m a 5b39-03 0 maC20 ma 4.88 m a 5b39-04 0 maC20 ma 4.88 m a stb-tci thermocouples e C100 c to +1000 c 0.27 c j0 c to +760 c 0.19 c k0 c to +1250 c 0.31 c t C200 c to +400 c 0.15 c s0 c to +1750 c 0.43 c low level voltage in 0.005 v 2.44 m v 0.025 v 12.21 m v 0.05 v 24.41 m v 0.10 v 48.83 m v stb-hli high level voltage in 5 v 2.44 mv 10 v 4.88 mv stb-tc thermocouples e C100 c to +1000 c 0.27 c j0 c to +760 c 0.19 c k0 c to +1250 c 0.31 c t C200 c to +400 c 0.15 c s0 c to +1750 c 0.43 c low level voltage in 0.1 v 48.83 m v 0.05 v 24.41 m v 0.025 v 12.21 m v 0.01 v 4.88 m v 0.005 v 2.44 m v stb-hl02 high level voltage in 5 v 2.44 mv 10 v 4.88 mv high level voltage out 0 vC5 v 1.22 mv 5 v 2.44 mv stb-aot high level voltage out 10 v 4.88 mv 5 v 2.44 mv 0 vC5 v 1.22 mv 0 vC10 v 2.44 mv current out 0 maC20 ma 4.88 m a 4 maC20 ma 3.91 m a *numbers shown reflect use with rti-820 with 12-bit d/a or a/d resolution. the 5b series modules listed are the * standard ranges. special ranges are available upon request. obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C10C rev. a outline dimensions dimensions shown in inches and (mm). rack mount ac1636 for use with 5b02 top view of rack with panel 5b series signal conditioning modules screw terminals partial side view with panel 3.5 (88.9) 19 (482.6) 3.7 (94.0) 3.2 (81.3) 0.75 (19.1) obsolete
5b02, stb-tci, stb-hli, stb-tc, stb-hl02, stb-aot C11C rev. a outline dimensions dimensions shown in inches and (mm). rack mount rm-02 for use with stb-tci, stb-hli, stb-tc, stb-aot, and stb-hl02 top view panel #1 panel is 8.25 3 6.87 (209.6 3 172.7) panel #2 screw terminals 4 (101.6) partial side view with panel height with cover cv-01 height without cover 7 (177.8) 19 (482.6) 5.28 (134.1) 0.75 (19.1) 1.97 (50.0) 2.14 (54.4) c1221cC0C6/98 printed in u.s.a. obsolete

▲Up To Search▲

Price & Availability of STBHL02-15

	To Download STBHL02-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .